Vente Shuttle ENP-2320 adaptateur de remplacement pour 250W ATX Enhance ENP-2320A Power Supply. Les spécifications de ce chargeur pour Shuttle ENP-2320 250W répondent en tous points aux normes du constructeur d'origine. 30 jours de garantie de remboursement et 1 an de garantie.
Adaptateur Shuttle ENP-2320 Caractéristiques
Références:#SHU17665
Marque Compatible:Shuttle
Entrée AC:100-240V 4-2A VAC Auto Sensing
Sortie:+3.3V 17A, +5V 13A, +12V 16A, -12V 0.3A, +5Vsb 2A
Pouvoir:250W
Dimensions:3.2"(W) X 5.9"(L) X 1.7"(H)
Les circuits électroniques de la plus haute qualité assurent une durabilité, une efficacité et une sécurité au travail accrues.
Plus de 3 ans de durée de vie - une durabilité inégalée.
Caractéristiques de sécurité: protection contre les surintensités; protection totale contre les surtensions; protection contre les courts-circuits, test à 100 % avant livraison, norme UL, CE, FCC, RoHS.
Service et support: 30 jours de garantie de remboursement et 1 an de garantie.
Remplace les batteries suivantes:
Output Wattage 250W
This is an 80 PLUS Bronze Certified: Power Supply Units (PSUs) that have more than 80% energy efficiency at 20%, 50% and 100% of rated load, and a power factor of 0.9 or greater at 100% load. That is, PSUs that waste 20% or less electric energy as heat at the specified load levels, thus reducing electricity use and bills compared to less efficient PSUs.
Dimension: 3.2"(W) X 5.9"(L) X 1.7"(H)
Form Factor: TFX12V
Active PFC/CE, UL/CUL Safety Compliant
Input Voltage: 100-240V 4-2A VAC Auto Sensing
Frequency: 60-50Hz
Holdup Time: > 14ms @ Full Load
MTBF: 100,000 HRS
DC Output: +3.3V 17A, +5V 13A, +12V 16A, -12V 0.3A, +5Vsb 2A
Dimensions: 5.9"x 3.2"x 1.7" (150Lx82Wx43H mm)
Connectors:
1x 20/24 Pin ATX Connector
1x 4-Pin 12V
3x Peripheral Connectors (MOLEX 4 PIN)
1x Power Connector for Floppy Drives.
2x SATA connectors
Replacement/Compatibility Reference:
Achme AM630BS20S
FSP200-50PLA
Shuttle PS-X200W
WIN-200PS (original PS has extra 6 pin auxiliary connector)
Enhance ENP-2320
Enhance ENP-2320A
Enhance ENP-2322B-G
Enhance ENP-2322C
Enhance ENP-0812A
Use this power supply to replace the power in your Shuttle XPC mini-barebones system such as SB61G2, SS51G, SK41G SB51G and many others.
NOTE: If you own the early Shuttle SV25 with the wires coming out the top (long side) of the power supply, this model will not fit in your case.